Interior Cladding

INTERIOR CLADDING

PACIFIC PRODUCT & SOLUTIONS brings interior cladding with outstanding craftsmanship in vibrant colour and beautiful forms. The panels made by a bunch of resin bonded paper, which is pressed with great pressure in high temperature and treated with double hardened acrylic PUR resins that unfailingly provide extremely effective all year round weather protection. Especially in such varying weather conditions as in India.

Pacific Interior Cladding stands tall above all other ways of traditional building in the following ways.

Advantages of the non-bearing, rear-ventilated facades (VHF) :

  • Savings through the shorter scaffolding time.
  • There is no need to make pilaster on the wall.
  • There is no need to make wall putty /paint on the wall.
  • There is no need to electric conciliation inside the brick wall.
  •  It can be easily installed without pilaster, POP/ Paint on the wall.
  •  Installation under any weather conditions.
  •  Exact cost estimation of the Interior paneling is available.
  •  No disposal costs during the installation phase.
  •  Long maintenance intervals and low follow-up costs.
  •  Long-term value retention and appreciation of the building.

Pacific Interior Paneling - The big image:-

Cost Effectiveness

Sustainable and long-term construction requires cost effective solutions. Pacific product & solutionsCladdings are just that! Long service life, lengthy maintenance intervals and the recyclable components are essential to Facades that stands the economy of time.

Non-Volatile Costing Parameters

Pacific product & solutions provides costing parameters that are exact and stable be it new or in case of renovations.

Key points of Construction

  • Material should not be exposed to water during construction and installation. Therefore, the panels must always be able to dry out.
  • Connections of facades panels to one another always have to be made in the same panel direction.
  • Cladding can show deviations from being flat and this is to be compensated for by the sub-construction being executed so that it is stable and flat.
  •  All connections to other components or to the background must be executed firmly.
  •  Elastic intermediate spacers to the sub-construction elements that permit a greater tolerance than +0.5mm must definitely be avoided.
  •  Installation under any weather conditions.
  •  Exact cost estimation of the Interior paneling is available.
  • No disposal costs during the installation phase.
  •  Long maintenance intervals and low follow-up costs.
  •  Long-term value retention and appreciation of the building.

Assembly Parameters

Pacific Interior Paneling come along with essential fasteners made using non-corrosive materials like Aluminum & Stainless Steel. A large head of these fasteners (rivets) are colour lacquered with epoxy paints so as to compliment the Pacific Interior Paneling range.

  • Rivet body : Aluminum Alloy 5052
  •  Rivet Pin : 302 AISI
  •  Pull off strength of rivet Pin: Min 4626N & Max 5382N

Diameter of Drill Hole in Facades Panels:

  • Sliding points : 8.5mm or as required
  •  Fixed points : 5.1mm
  •  Diameter of drill hole in the aluminum substructure: 5.1mm
Scroll to top